1.75 Mm 3.00 Mm 3D Printer Filament Extruder Making Machine With Single Screw
1.75 mm plastic filament extruder 3.00 mm 3D printer filament making machine
General Introduction
PLA/ABS filament extrusion line consists of single screw extruder,water tank,tractor machine,measuring diameter machine,rolling up machine.Precise cooling water temperature control system, laser measuring system and efficient loading winding system etc.. The program will automatically control the diameter according to the data from the laser, which will make sure that the tolerance is less than 0.03mm.
------Common Requirements
------The machine’s design meets the international standard: CE Standard.
------Extruder noise levels must comply with Chinese law and industrial standards
------E-Stop Switch
------Control system to prevent machine from damaged at abnormal condition.
------Flash lamp and voice indicate that the machine is under abnormal condition
------The parts which might harm the operator are all designed with protection.
3D printer filament extruder consists of single screw extruder, water tank, tractor machine, laser, rolling up machine. its control system consists of intelligent temperature control table, imported electrical components and converter. Main feature of this line stable extrusion, good plasticizing effect, high degree of control precision, convenient operation etc.
Machine Composition
| Item |
Equipment Line |
QTY/SET |
| 1 |
Mixer Machine |
1 |
| 2 |
Vacuum Loader |
1 |
| 3 |
Hopper Dryer |
1 |
| 4-1 |
Single Screw Extruder |
1 |
| 4-2 |
Die Head |
1 |
| 5 |
Water Tank |
1 |
| 6 |
Tractor Machine |
1 |
| 7 |
Storage Thread Stand |
1 |
| 8 |
Roundness Laser |
1 |
| 9 |
Rolling Up Machine |
1 |
| 10 |
Vacuum Packing |
1 |
3D printer filament extruder date sheet
| Model |
GSD-16 |
GSD-35 |
GSD-45 |
GSD-65 |
| Screw diameter (mm) |
16 |
35 |
45 |
65 |
| Screw L/D |
20:1 |
25:1 |
25:1 |
25:1 |
| Heating zone |
3 |
3 |
3 |
4 |
| Producing speed (m/min) |
8-10 |
60-80 |
60-100 |
60-200 |
| Filament Diameter (mm) |
1.75, 3.00 |
1.75, 3.00 |
1.75, 3.00 |
1.75, 3.00 |
| Tolerance (mm) |
+/-0.05 |
+/-0.03 |
+/-0.03 |
+/-0.03 |
| Capacity (kg/h) |
1-2 |
8-15 |
15-30 |
30-50 |
Service
------Packing type: Wooden base plate, damp proof plastic lining, fully-closed plate-box external
------Delivery time: 45 days after receive the payment of deposit
------Payment: Deposit 40% by T/T in advance, delivery against payment of 60% balance after qualified acceptance
------Leave factory testing: before leaving factory, equipment should be tested by both parties. Test material offered by buyer
------Installation: we will send 1-2 technicians for machine’s installation and debugging according to customer’s requirement; the technician’s board and lodging and the round-trip airplane ticket expense undertakes by the buyer,additional service charge USD50.For each technician/one day, estimate 5-7 working days
------Guarantee period: Guarantee period is 12 months after getting the machine
------The supplier shall provide the service:(after pay the machine)
------the supplier to send adjustment of installation and commissioning
------the supplier direct buyer's technical personnel operating the machine
------The buyer shall provide the facilities and preparations:(Delivery machine to finish)
------foundation and adapter power supply water and compressed air pipe and related projects
------other interface equipment not listed above
------trial use of the raw material and product testing, inspection
Contact
Nanjing GS-mach Extrusion Equipment Co.,Ltd
No.1 Shanghu Industrial Park,Jiangning Street, Jiangning District,Nanjing China
Mobile Phone: +86 18851021602
Tel: 86-25-81030382-8:00~17:00
Fax: 86-25-52790852
Email: extruder5@njgsmach.com
Web: http://www.plasticpelletextruder.com
