PLA ABS 3D Printer Filament Extrusion Line Plastic Filament Making Machine
General Introduction
ABS PLA PA HIPS PC filament extrusion line consists of single screw extruder, water tank, tractor machine, rolling up machine. its control system consists of intelligent temperature control table, imported electrical components and inventor. The filament is extrusion from single screw extruder pass by die head, pass hot water tank and cold water tank to cool and form the filament. Tractor pull the filament as per different speed to get different diameter filament. The filament diameter will be showed on the laser, then reflect to PLC. The final filament will be winding up into spools. Main feature of this line: stable extrusion, good plasticizing effect, high degree of control precision, convenient operation etc.
Specification
Environment
------Location: indoor
------Power supply: no danger areas
------Humidity: 0.85 no condensation point:
------Temperature:0-40
Working condition
------Power supply: three phase four wire system with ground line, AC 380V/50HZ 3P
------Installing power:≤30kw
------Water supply: water consumption<5m3 /h, water temperature≤38℃
------Water consumption: The water is circulating water.
------Air supply:0.6~0.7Mpa
------Installed Power:45KW, Consumption Power:30KW
Extrusion Line
------Install space:13.5m*1.2m*2 m(length*width*height)
------Average output:30-50kg/h+/-10%,production speed 50-200m/min(DN1.75mm rod products)
------main Raw material:1.1kg/kg
Equipment Line
1. Mixer machine
2. vacuum loader
3. hopper dryer
4. single screw extruder
5. die head
6. water tank
7. tractor machine
8. storage thread stand
9. roundness laser
10. rolling up machine
11. vacuum packing
About US.
We are the earliest supplier in producing 3D printer filament machine and have full experience in this field.So I believe we can provide you the best service and best quality machine from China. we can provide you the best service and best quality machine from China.
------Packing type: Wooden base plate, damp proof plastic lining, fully-closed plate-box external
------Delivery time: 45 days after receive the payment of deposit
------Payment: Deposit 40% by T/T in advance, delivery against payment of 60% balance after qualified acceptance
------Leave factory testing: before leaving factory, equipment should be tested by both parties. Test material offered by buyer
Contact
Nanjing GS-mach Extrusion Equipment Co.,Ltd
No.1 Shanghu Industrial Park,Jiangning Street, Jiangning District,Nanjing China
Mobile Phone: +86 18851021602
Tel: 86-25-81030382-8:00~17:00
Fax: 86-25-52790852
Email: extruder5@njgsmach.com
Web: http://www.plasticpelletextruder.com
