1.75 mm 3.0 mm 3D Printer Filament Extruder plastic machine for home use DIY
General Introduction
The common 3D printer usually uses the FDM schemeng. Generally melted the plastic material, then put it on one floor by one floor. Finally, it is constructed as the model that the user wants.At present, ABS and PLA are the two kinds of consumables that we use most for FDM 3D printers. Both have the characteristics of thermoplasticity. This means that they are softened when they are heated. In this case, you can shape them when they are heated, and they can maintain a new shape when they cool.
Specification
| Model |
Power |
Diameter |
Capacity |
Tolerance |
Material |
| LAb GSD-16 |
200 W |
1.75 mm - 3 mm |
1-2 kg/h |
+/- 0.05 mm |
ABS,PLA,PA,HIPS,PET |
| GSD-35 |
4 KW |
1.75 mm - 3 mm |
8-15 kg/h |
+/- 0.03 mm |
ABS,PLA,PA,HIPS,PET |
| GSD-45 |
7.5 KW |
1.75 mm - 3 mm |
15-30 kg/h |
+/- 0.03 mm |
ABS,PLA,PA,HIPS,PET |
| GSD-65 |
15 KW |
1.75 mm - 3 mm |
30-50 kg/h |
+/- 0.03 mm |
ABS,PLA,PA,HIPS,PET |
Machine Composition
| Item |
Equipment Line |
QTY/SET |
| 1 |
Mixer Machine |
1 |
| 2 |
Vacuum Loader |
1 |
| 3 |
Hopper Dryer |
1 |
| 4-1 |
Single Screw Extruder |
1 |
| 4-2 |
Die Head |
1 |
| 5 |
Water Tank |
1 |
| 6 |
Tractor Machine |
1 |
| 7 |
Storage Thread Stand |
1 |
| 8 |
Roundness Laser |
1 |
| 9 |
Rolling Up Machine |
1 |
| 10 |
Vacuum Packing |
1 |
Company Info.
We are the earliest supplier in producing 3D printer filament machine and have full experience in this field.So I believe we can provide you the best service and best quality machine from China. we can provide you the best service and best quality machine from China.
Contact
Nanjing GS-mach Extrusion Equipment Co.,Ltd
No.1 Shanghu Industrial Park,Jiangning Street, Jiangning District,Nanjing China
Mobile Phone: +86 18851021602
Tel: 86-25-81030382-8:00~17:00
Fax: 86-25-52790852
Email: extruder5@njgsmach.com
Web: http://www.plasticpelletextruder.com
