1 -2 kg/h lab 3D printer filament extruder ABS PLA filament home use output
Description:
Low cost 3D printing is an emerging market. Competitors including Makerbot, Printrbot, Solidoodle, and Ultimaker sell 3D printers from between $399-$2200. These 3D printers require extruded plastic filament that costs about $35-$50 per kg. This is between 5-8 times the cost of the raw resin pellets. To get widespread adoption of the technology the cost of using the 3D printers will need to go down.
The Solution:
Create your own low-cost, quality filament at home, with our filament extruder. Now our new lab filament machine will not make you millions, but it will make a KG of filament in just 1~2hours, right from your desktop, bringing the power to use a variety of plastics, recycled or virgin, to make low-cost, high-quality filament, to anyone.
3D Printer Filaments Extrusion Equipment Series
| Model |
Power
|
Diameter
|
Capacity
|
Tolerance
|
Material
|
|
Lab Machine
|
200 W |
1.75mm/3mm |
0.5～1kg/h |
+0.05mm |
PLA ABS HIPS PA,PET |
| GSD-35 |
4 KW |
1.75mm/3mm |
10-20kg/h |
+0.03mm |
PLA ABS HIPS PA PET |
| GSD-45 |
7.5 KW |
1.75mm/3mm |
30-50kg/h |
+0.03mm |
PLA ABS HIPS PA PET |
| GSD-65 |
15 KW |
1.75mm/3mm |
60-80kg/h |
+0.03mm |
PLA ABS HIPS PA PET
|
------Brief Introduction
This lab plastic filament extrusion line consists of single screw extruder, PLC control system, water tank, measuring Diameter device, tractor machine, rolling up machine. Main feature of this line: stable extrusion, good plasticizing effect, high degree of control precision, convenient operation etc.
------Common Requirements
------The machine’s design meets the international standard:CE Standard.
------Extruder noise levels must comply with Chines law and industrial standards
------The following technical documents included in the content of purchasing object
------Installation layout diagram of machines
------Circuit diagram of machines
------Operation manual of machines
------Certificate of machine quality
------Certificate of machine warranty by supplier
Machine Composition
| Item |
Equipment line |
QTY/SET |
| 1 |
20mm extruder |
1 |
| 2 |
Hot and cold water tank |
1 |
| 3 |
Measuring Diameter device |
1 |
| 4 |
Tractor machine |
1 |
| 5 |
Rolling up machine |
1 |
Main component:
A.16mm extruder
B. Hot and cold water tank
C. Measuring Diameter device
D. haul-off machine
E. Rolling up machine
Character:
1. Brand:GS-mach
2. Material:ABS PLA material both
3. Capacity:1~2kg/h
4. Tolerance:+/-0.05mm
5. Very convenient and easy taking
6. Easy operation and maintain,Cheaper price to get the good filament
------Leave factory testing: before leaving factory,equipment should be tested by both parties.Test material offered by buyer
------Installation: we will send 1-2 technicians for machine’s installation and debugging according to customer’s requirement;
------Guarantee period: Guarantee period is 12 months after leaving factory,damaged
------The supplier shall provide the service:(after pay the machine)
------the supplier to send adjustment of installation and commissioning
------the supplier direct buyer's technical personnel operating the machine
------The buyer shall provide the facilities and preparations:(Delivery machine to finish)
------foundation and adapter power supply water and compressed air pipe and related projects
------other interface equipment not listed above
------trial use of the raw material and product testing, inspection
